The simple circuit in Figure 1 uses a low-current-drain MAX4073H amplifier to sense the current flowing through a 4- to 20-mA loop. The circuit senses the current through a 1Ω resistor with a fixed ...

The I/O capabilities built into most microcontrollers make it easy to measure the analog world. Say you want to build a data logger for temperature. All you need to do is get some kind of sensor that ...

The accuracy of a 4-20 mA transmitter depends on the integrity of its current-loop path, which must be free of shunt paths and ground loops, both within the transmitter and external to it. External to ...

Using an analog temperature sensor, an op amp, a transistor, and a low-dropout linear regulator, this circuit provides a 4-to-20-mA output over a 3.75- to 28-V compliance range (see the figure).

NORWOOD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NAS: ADI) introduced today the CN0267 demonstration circuit for a loop powered HART® (Highway Addressable Remote Transducer) enabled smart ...

600T series signal splitters receive a 4-20 mA current input and provide two identical isolated 4-20 mA output signals. Each channel operates independently to prevent interaction between channels.

Imagine this scenario: There is a flow meter with 4–20 mA output setup. The switch is flipped, thereby turning it on. Then it is noted that the readings are off, and the required output is not shown.